Woodworking Tools

1. Competitive Wood Brad Point Drill Bits

1.Made of high carbon steel Brad point with two shoulder cutters
2.Black surface finish.
3.For drilling accurate, splinter-free holes in soft wood, hard wood, plywood and hardboard.
4 Use in hand drills, electric portable drills, drill presses and lathes.
5.Center point enters first,prevents "Skating"
6.Cutting flutes are engineered for optimum Chip ejection so drill accurate,splinter-free holes in soft wood,hard wood,paywood and hard wood.
7. Diameter size: 3mm-30mm.
8. total length:150mm,160mm, 200mm etc or with extra-length 300mm, 400mm, 600mm or 8", 12", 16" overall length are available.
9. Brad Point Drill Bits Set are available.
10.Packaging: Individual Packaging in pouch,blister card,tube or as per request.

2. Hex Shank Wood Auger Drill Bits
For precise drilling in soft and hard wood, large section beam, chipboard and plywood
1. Cutting edge: Precision ground for long life
2. Full length heat treatment: Guards against bending bit in heavy-duty applications
3. Hex shank: Prevents spinning in drill chuck
4. Screw threaded center point: For precisely locating the bit and for fast self-starting of the hole
5. Single outer cutting spur: For splinter free drilling and clean hole
6. Wide lands: Keep bit straight as it bores through the hole
7.Diameter Size: 6mm-40mm.

3. Wood Spade drill bits,Wood Flat Drill Bits

1. Material: High carbon steel or CV steel
2. Surface finishing: Polishing, Titanium coated, sand plated etc for choice;
3. Design for using in hand drills,electric portable drills,drill presses and lathes
4. hex shank;
5. Long life and fast drilling
6. Dia Size: 6mm-55mm.
7.cutting flutes are engineered for optimum chip ejection so drill will not bindand burn out
8.angled cutting head and precision ground locating point.
9.For fast accurate drilling into hardwoods, softwoods and man-made timber products. Suitable for most power drills

4. Circular TCT Saw Blade for Wood and Polywood

Fast cutting, high speed and long lifespan.

high quality carbide tips. 50# or 65# Mn steel

It improves the effeciency of cutting and has good performance, and greatly decrease the material waste and the working time.

It is used for cutting soft wood, MDF, Hard wood, Plywood, Laminated, Bilaminated, Veneered, Chipboard, Picture Frame, etc...

Size: 110mm-500mm