Wood Auger Drill Bits with Handle
1.Diameter Size: 6mm-30mm; overall length:400mm-650mm;
2.. Precision ground, hardened high carbon steel;
3. Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind
4. Single-spur cutting edge scribes the circumference of the hole for a smoother finish
Coarse screw point provides fast boring in hard and soft woods
5. Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs
6. High carbon steel, Single or double flute.
7.Fine pitch spiral pulls auger into workpiece and single spur slices timber ahead of the cutting edge, producing accurate holes.
8.Special shank design with handle, good for using by manual;
9. Solid center flute provide added rigidity.
10.Self feedding screw pulls bit into wood for precise and easy drilling.
11.Full length heat treatment guards against bending bit in heavy-duty applications.
12.For precise drilling in general hard and soft wood.
| Diameter Size | overall length | Inch | overall length |
| 6 | 400 | 1/4" | 16" |
| 8 | 400 | 5/16" | 16" |
| 10 | 400/460 | 3/8" | 16" |
| 11 | 400/460 | 7/16" | 16"/18" |
| 12 | 400/460 | 1/2" | 16"/18" |
| 13 | 400/460 | 9/16" | 16"/18"/20" |
| 14 | 400/460 | 5/8" | 16"/18"/20" |
| 15 | 400/460/500 | 11/16" | 16"/18"/20" |
| 16 | 400/460/500 | 3/4" | 16"/18"/20"/24"/26" |
| 17 | 400/460/500 | 13/16" | 16"/18"/20"/24"/26" |
| 18 | 400/460/500 | 7/8" | 16"/18"/20"/24"/26" |
| 19 | 400/460/500 | 15/16" | 16"/18"/20"/24"/26" |
| 20 | 400/460/500/600/650 | 1" | 16"/18"/20"/24"/26" |
| 21 | 400/460/500/600/650 | 1-1/8" | 16"/18"/20"/24"/26" |
| 22 | 400/460/500/600/650 | 1-1/4" | 16"/18"/20"/24"/26" |
| 23 | 400/460/500/600/650 | | |
| 24 | 400/460/500/600/650 | | |
| 25 | 400/460/500/600/650 | | |
| 26 | 400/460/500/600/650 | | |
| 28 | 400/460/500/600/650 | | |
| 30 | 400/460/500/600/650 | | |