1.Heavy-duty, ultra-heavy duty tasks, it is commonly used in lathe, miller, CNC and woodworking machinery. It may endure high-speed cutting.
2.It utilizes two different diam. And length check rod to examine the radial skip. Large rod Φ 13 length 105mm, small rod Φ 6 length 65mm. The max. Radial skip of this product will not exceed 0.16mm.
3.It reaches to national standard A Level accuracy criterion.
4. Torque: GB/T6087-93 fixed input 24MM. Output 14N. M. The product may maximumly input 50N. M and ouput 7N. M. With no damage to various spares of the drill chuck.
| Thread Mount : UNF | |||||
| mm | inch | Taper mount | mm | mm | KG |
| 0.2-6 | 1/64-1/4 | 3/8-24UNF | 34 | 71 | 0.313 |
| 0.2-8 | 1/64-5/16 | 3/8-24UNF | 39 | 81 | 0.477 |
| 0.2-10 | 1/64-3/8 | 3/8-24UNF | 44 | 91 | 0.686 |
| 0.2-13 | 1/64-1/2 | 1/2-20UNF | 49 | 101 | 0.944 |
| 0.2-16 | 1/64-5/8 | 5/8-24UNF | 54 | 113 | 1.268 |
| Thread Mount : M | |||||
| mm | inch | Taper mount | mm | mm | KG |
| 0.2-6 | 1/64-1/4 | M10×1 | 34 | 71 | 0.313 |
| 0.2-8 | 1/64-5/16 | M10×1 | 39 | 81 | 0.477 |
| 0.2-10 | 1/64-3/8 | M10×1 | 44 | 91 | 0.686 |
| 0.2-13 | 1/64-1/2 | M12×1.25 | 49 | 101 | 0.944 |
| 0.2-16 | 1/64-5/8 | M16×1.25 | 54 | 113 | 1.268 |
| Morse Taper Mount: | |||||
| mm | inch | Taper mount | mm | mm | KG |
| 0.2-6 | 1/64-1/4 | B10 | 34 | 71 | 0.313 |
| 0.2-8 | 1/64-5/16 | B12 | 39 | 81 | 0.477 |
| 0.2-10 | 1/64-3/8 | B12 | 44 | 91 | 0.686 |
| 0.2-13 | 1/64-1/2 | B16 | 49 | 101 | 0.944 |
| 0.2-16 | 1/64-5/8 | B18 | 54 | 113 | 1.268 |
| 0.2-20 | 1/64-3/4 | B22 | 59 | 132 | 1.716 |
| Jacquard Taper Mount: | |||||
| mm | inch | Taper mount | mm | mm | KG |
| 0.2-6 | 1/64-1/4 | J1 | 34 | 71 | 0.313 |
| 0.2-8 | 1/64-5/16 | J2 | 39 | 81 | 0.477 |
| 0.2-10 | 1/64-3/8 | J2 | 44 | 91 | 0.686 |
| 0.2-13 | 1/64-1/2 | J33 | 49 | 101 | 0.944 |
| 0.2-16 | 1/64-5/8 | J6 | 54 | 113 | 1.268 |
| 0.2-20 | 1/64-3/4 | J3 | 59 | 132 | 1.716 |