HSS T-slot mills with straight shank
14*(2-6)*8*60 means: 14 is the blade diameter, 2-6 is the thickness of the blade, 8 is the shank diameter, and 60 is the total length
2-6 The thickness of the blade is 2 3 4 5 6 mm, please note the required thickness!
Uses: Mainly used for T-slots of fixed size, and also for milling general grooves, stepped surfaces, and side surfaces.
Features and precision: This tool is a high-efficiency, long-life, high-quality special tool for processing T-slots. After straight grooves are milled, T-slots with the required accuracy can be milled at one time. The end edge of the milling cutter is suitable. Cutting angle, smooth cutting and small cutting force
| b | c | L | D | Z |
| 11 | 3.5 | 53.5 | 10 | 4 |
| 12.5 | 6 | 57 | 10 | 4 |
| 16 | 8 | 62 | 10 | 4 |
| 18 | 8 | 70 | 12 | 6 |
| 21 | 9 | 74 | 12 | 6 |
| 25 | 11 | 82 | 16 | 6 |
| 29 | 12.5 | 85 | 16 | 6 |
| 32 | 14 | 90 | 16 | 6 |
| 36 | 15.5 | 101 | 25 | 8 |
| 40 | 18 | 108 | 25 | 8 |
| 45 | 20 | 112 | 25 | 8 |
| 50 | 22 | 124 | 32 | 10 |
| 57 | 24 | 131 | 32 | 10 |
| 60 | 28 | 139 | 32 | 1 |