DIN345 HSS Rolled forged morse taper shank drills HSS Taper Shank Drill Bit
Material: HSS 4241, 4341, 9341, M2, M35
Size: 6.0-100.0mm
Process: Rolled forged
Surface: White, Black, White Edge, Tin-Coated
Details:
1. Process: 6.0-33.0mm Roll Forged, 31.0-100.0mm Milled
2. Standard: Strictly as per DIN345 specification requested.
Point Angle:118 angle and 135angle
3. Application: Drilling deep hole on Non-Alloy Steel, Alloy Steel, Grey Cast Iron, Malleable Cast Iron, special aluminum or magnesium alloy.
4.118degree or 135 degree
5. Package: One PC into a Paper Tube or Plastic Tube, also Set Cases are available.
| D | L | l | |
| MM | MM | MM | |
| 6 | 225 | 145 | |
| 6.1-6.7 | 230 | 150 |
| 6.8-7.6 | 235 | 155 |
| 7.7-8.6 | 240 | 160 |
| 8.7-9.5 | 245 | 165 |
| 9.6-10.6 | 250 | 170 |
| 10.7-11.8 | 255 | 175 |
| 11.9-13.2 | 260 | 180 |
| 13.3-14 | 265 | 185 |
| 14.25-15 | 290 | 190 | |
| 15.25-16 | 295 | 195 |
| 16.25-17 | 300 | 200 |
| 17.25-18 | 305 | 205 |
| 18.25-19 | 310 | 210 |
| 19.25-20 | 320 | 220 |
| 20.25-21 | 330 | 230 |
| 21.25-22.25 | 335 | 235 |
| 22.5-23 | 340 | 240 |
| 23.25-23.5 | 360 | 240 | |